Husqvarna Chainsaws
Our chainsaws are lightweight yet powerful and dependable. We offer a variety of models and sizes, ranging from 12” to 32” in stock, with additional models available upon request.
Evergreen Mowers 425-742-1999
Find it at your local Lynnwood, WA, servicing dealer.
Browse online, purchase in our store.
Scroll down ↓ to see what we offer, and thanks for visiting.
Free Husqvarna German made axe with any gas-powered Chainsaw a $89.99 value or Hand Loppers
Limited to stock on hand. Can be substituted for Lopers or hand pruners.
Homeowner's models of Saws
Power Axe 350i battery chainsaw
This chainsaw delivers superior cutting power compared to Husqvarna's 20-inch 450 Rancher gas chainsaw. It is 10% lighter, enhancing maneuverability and reducing fatigue when compared to the leading competitor's chainsaw equipped with a 56V, 5.0 Amp Hour battery. The bar length is 18 inches, and the weight, excluding battery and cutting equipment, is 7.72 lbs.
Power Axe 350i (battery and charger included)
970601202 $479.99
Free German made Axe. Retails $89.99 or Loppers.
Husqvarna Power axe 350i Features and Specifications.
Chain Brake Indicator Light: Illuminates when brake is engaged
More Cutting Power than Gas*: Delivers superior cutting power than comparable gas chainsaws *When compared to Husqvarna’s 20-in 450 Rancher gas chainsaw.
10% Lighter Weight**: For increased maneuverability and less fatigue **When compared to the leading competitor’s chainsaw with a 56V, 5.0 Amp Hour battery.
Interchangeable Battery System: Able to be used in all Husqvarna battery tools, our lithium-ion batteries are durable, easy to swap and recharge quickly
Active Cooling System: Provides consistent power and longer battery life
Boost Mode: Delivers 25% more power when you need it
Equipped with X-CUT® Chain: Includes Husqvarna X-CUT® chain for top-of-the line performance and sharpness that lasts
Durable, Efficient Motor: Brushless motor for increased durability and high efficiency
Tool-less Chain Tensioning: Quickly and easily adjust the chain without tools
Low Carbon Emissions: By choosing this product, you can feel confident that it produces lower carbon emissions during active use compared to a traditional petrol product. This battery-driven product does not emit any CO₂ during use while still providing the power and quality that you expect from a Husqvarna product. However, it’s important to note that CO₂ emissions are generated during other stages of the product´s lifecycle, such as production, charging and end-of-life disposal.
18", 3/8",Tool-less, Kit incl battery Bli30 and C80, US/CA
SKU: 970 60 12‑02
Engine
Chain speed at max power 38.7 fts
Battery voltage 40 V
Battery type Li-Ion
Motor type BLDC (brushless)
Oil pump capacity, max 9 ml/min
Oil pump capacity, min 7 ml/min
Oil pump type Automatic
Equipment
Recommended bar length, min 18 in
Pitch 3/8" mini
Recommended bar length, max 18 in
Chain type S93G
Battery BLi30, 36V / 7,7Ah
Bar length 457 mm
Bar length (inch) 18 in
Sprocket type Spur 6
Gauge .050"
Dimensions
Weight (excl. battery and cutting equipment) 7.72 lbs
Sound and noise
Sound pressure level at operators ear 91 dB(A)
Sound power level, guaranteed (LWA) 102 dB(A)
Sound power level, measured 99 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 3.7 m/s²
Equivalent vibration level (ahv, eq) front handle 2.6 m/s²
Lubricant
Oil tank volume 0.423 US pint
Husqvarna 435-16" gas chainsaw
The second-generation chainsaw stands out for its lightweight, efficiency, and versatility, making it an ideal choice for those in search of a model that's effortless to start and handle. It features a smooth start with just a gentle pull, a compact saw body, and convenient flip-up tank caps. The chainsaw is powered by an X-Torq® engine designed to lower fuel consumption and reduce emissions. Additionally, it comes with Smart Start®, a fuel pump, and an auto-return stop switch that make starting a breeze, plus a tool-less chain tensioner for easy adjustments.
Cylinder displacement: 40.9 cm³
Weight (excluding cutting equipment): 9.7 lbs
970 51 53-36
w/16" bar $349.99
Free German made Axe. Retails $89.99 or Loppers
Husqvarna 435 Features and Specifications.
Powerful and Efficient X-TORQ® Engine: X-Torq® engines deliver a great power and torque thanks to highly efficient combustion.
LowVib® Technology: Dampeners between the engine and chassis significantly reduce vibrations so you can work more comfortably
Smart Start® Technology: Specially-designed engine and starter for easy and fast starting with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Quick Start with Air Purge: Air purge removes air from carburetor and fuel system for easy starting
Air Injection™ Technology: Centrifugal air cleaning system expels larger dust and debris particles before they reach the air filter to help improve engine life
Three-Piece Crankshaft: Forged three-piece crankshaft delivers maximum durability for even the toughest of jobs
Inertia-Activated Chain Brake: Reduces the likelihood of injury due to kickback.
Quick-Release Air Filter: Easily remove and replace the filter after cleaning
Fuel Indicator: Transparent fuel indicator makes it easy to check fuel level
Flip-Up Fuel Cap: Easy to open and secures firmly, even when wearing thick gloves
Snap-Lock Cylinder Cover: Saves time when changing spark plugs and cleaning.
Felling Marks: Dedicated marks for increased felling precision
No Oil at Idle: Chain oil pump disengages when engine is idling to reduce oil consumption and mess
Side-Mounted Chain Tensioner: Easier access to chain tensioning device.
Best-in-Class Starting Performance*: Variety of easy starting features for hassle-free starting *Based on the series of Husqvarna features that support the starting performance when compared to competitive chainsaw models in the 35cc to 50cc range
Combined Choke/Stop Control: Provides easier starting and reduces the risk of engine flooding
X-CUT® Chain: Exceptional sharpness and durability
16" .325", 1,3 mm, H30, SN, FA single pack RTLBx
SKU: 970 61 21‑36
Engine
Chain speed at max power 56.76 fts
Cylinder displacement 40.9 cm³
Output shaft power
2.2 hp
Clutch engagement speed (±120) 4,300 rpm
Electrode gap 0.02 in
Idling speed 2,900 rpm
Ignition module air gap 0.01 in
Maximum power speed 9,000 rpm
Oil pump type Fixed flow
Equipment
Recommended bar length, min 13 in
Pitch .325"
Recommended bar length, max 18 in
Chain type H30
Bar length 40 cm
Bar length (inch) 16 in
Sprocket type Spur 7
Gauge .050"
Dimensions
Weight (excl. cutting equipment) 9.78 lbs
Sound and noise
Sound pressure level at operators ear 102 dB(A)
Sound power level, guaranteed (LWA) 114 dB(A)
Sound power level, measured 113 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 3.8 m/s²
Equivalent vibration level (ahv, eq) front handle 3.1 m/s²
Lubricant
Oil tank volume 0.53 US pint
Emission
Exhaust emissions (CO₂ EU V)2
813 g/kWh
HUSQVARNA 440 gas chainsaw
The second-generation chainsaw is lightweight, efficient, and versatile, perfect for those seeking a model that starts effortlessly and is easy to handle. It features a slimmer design, flip-up tank caps, and starts smoothly with a gentle pull. The X-Torq® engine ensures lower fuel consumption and reduced emissions. Additionally, it is equipped with Smart Start®, a fuel pump, and an auto-return stop switch to simplify the starting process.
Power output 2.4 hp
Cylinder displacement 2.5 cu.inch
Weight (excl. cutting equipment) 9.7 lbs
970 51 54-38
$379.99
Free German made Axe. Retails $89.99 or loppers'
Husqvarna 440 Features and Specifications.
Powerful and Efficient X-TORQ® Engine: X-Torq® engines deliver a great power and torque thanks to highly efficient combustion.
LowVib® Technology: Dampeners between the engine and chassis significantly reduce vibrations so you can work more comfortably
Smart Start® Technology: Specially-designed engine and starter for easy and fast starting with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Quick Start with Air Purge: Air purge removes air from carburetor and fuel system for easy starting
Air Injection™ Technology: Centrifugal air cleaning system expels larger dust and debris particles before they reach the air filter to help improve engine life
Three-Piece Crankshaft: Forged three-piece crankshaft delivers maximum durability for even the toughest of jobs
Inertia-Activated Chain Brake: Reduces the likelihood of injury due to kickback.
Quick-Release Air Filter: Easily remove and replace the filter after cleaning
Fuel Indicator: Transparent fuel indicator makes it easy to check fuel level
Flip-Up Fuel Cap: Easy to open and secures firmly, even when wearing thick gloves
Snap-Lock Cylinder Cover: Saves time when changing spark plugs and cleaning.
Felling Marks: Dedicated marks for increased felling precision
No Oil at Idle: Chain oil pump disengages when engine is idling to reduce oil consumption and mess
Side-Mounted Chain Tensioner: Easier access to chain tensioning device.
Best-in-Class Starting Performance*: Variety of easy starting features for hassle-free starting *Based on the series of Husqvarna features that support the starting performance when compared to competitive chainsaw models in the 35cc to 50cc range
Combined Choke/Stop Control: Provides easier starting and reduces the risk of engine flooding
X-CUT® Chain: Exceptional sharpness and durability
18" .325", 1,3 mm, H30, SN,FA saw RTLBx
SKU: 970 61 23‑38
Engine
Chain speed at max power 56.76 fts
Cylinder displacement 40.9 cm³
Output shaft power
2.4 hp
Torque, max. 2.16 Nm
Torque, max. at rpm 6,300 rpm
Clutch engagement speed (±120) 4,300 rpm
Electrode gap 0.02 in
Idling speed 2,900 rpm
Ignition module air gap 0.01 in
Maximum power speed 9,000 rpm
Oil pump type Fixed flow
Equipment
Recommended bar length, min 13 in
Pitch .325"
Recommended bar length, max 18 in
Chain type H30
Bar length 45 cm
Bar length (inch) 18 in
Sprocket type Spur 7
Gauge .050"
Dimensions
Weight (excl. cutting equipment) 9.78 lbs
Sound and noise
Sound pressure level at operators ear 102 dB(A)
Sound power level, guaranteed (LWA) 114 dB(A)
Sound power level, measured 112 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 4.2 m/s²
Equivalent vibration level (ahv, eq) front handle 3.8 m/s²
Lubricant
Oil tank volume 0.53 US pint
Lubricant type (Engine) Husqvarna 2 stroke or equiv. at 50:1
Emission
Exhaust emissions (CO₂ EU V)2
813 g/kWh
HUSQVARNA 450 Rancher gas chainsaw
Take your mastery of outdoor work to the next level. The Husqvarna 450 Rancher is an outstanding all-round chainsaw for anyone who values professional-grade power and performance. The X-Torq® engine reduces fuel consumption and emission levels. Meanwhile, a built-in fuel pump, Smart Start® technology and an auto-return stop switch ensure smooth start-ups. With this saw in the shed, you’ll be ready to handle yard cleanups, firewood cutting, light felling work and more
Cylinder displacement 50.2 см³
Bar length (inch) 20"
Weight (excl. cutting equipment) 11.2 lbs
970 51 56-28 18" bar with power box (case) $479.99
970 51 56-20 20" Bar $479.99
Free German made Axe. Retails $89.99
Husqvarna 450 Rancher Features and Specifications.
Powerful and Efficient X-TORQ® Engine: X-Torq® engines deliver a great power and torque thanks to highly efficient combustion.
LowVib® Technology: Dampeners between the engine and chassis significantly reduce vibrations so you can work more comfortably
Smart Start® Technology: Specially-designed engine and starter for easy and fast starting with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Quick Start with Air Purge: Air purge removes air from carburetor and fuel system for easy starting
Air Injection™ Technology: Centrifugal air cleaning system expels larger dust and debris particles before they reach the air filter to help improve engine life
Three-Piece Crankshaft: Forged three-piece crankshaft delivers maximum durability for even the toughest of jobs
Inertia-Activated Chain Brake: Reduces the likelihood of injury due to kickback.
Quick-Release Air Filter: Easily remove and replace the filter after cleaning
Fuel Indicator: Transparent fuel indicator makes it easy to check fuel level
Flip-Up Fuel Cap: Easy to open and secures firmly, even when wearing thick gloves
Snap-Lock Cylinder Cover: Saves time when changing spark plugs and cleaning.
Felling Marks: Dedicated marks for increased felling precision
No Oil at Idle: Chain oil pump disengages when engine is idling to reduce oil consumption and mess
Side-Mounted Chain Tensioner: Easier access to chain tensioning device.
Best-in-Class Starting Performance*: Variety of easy starting features for hassle-free starting *Based on the series of Husqvarna features that support the starting performance when compared to competitive chainsaw models in the 35cc to 50cc range
Combined Choke/Stop Control: Provides easier starting and reduces the risk of engine flooding
X-CUT® Chain: Exceptional sharpness and durability
Engine
Chain speed at max power 56.76 fts
Cylinder displacement 50.2 cm³
Output shaft power1 3.2 hp
Torque, max. 2.6 Nm
Torque, max. at rpm 7,200 rpm
Clutch engagement speed (±120) 4,300 rpm
Electrode gap 0.02 in
Idling speed 2,700 rpm
Ignition module air gap 0.01 in
Maximum power speed 9,000 rpm
Oil pump type Fixed flow
Equipment
RPitch .325"
Recommended bar length, max 20 in
Chain type SP33G
Bar length 50 cm
Bar length (inch) 20 in
Sprocket type Spur 7
Gauge .050"
Dimensions
Weight (excl. cutting equipment) 11.33 lbs
Sound and noise
Sound pressure level at operators ear 104 dB(A)
Sound power level, guaranteed (LWA) 115 dB(A)
Sound power level, measured 113 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 4.9 m/s²
Equivalent vibration level (ahv, eq) front handle 3.1 m/s
Lubricant
Oil tank volume 0.55 US pint
Emission
Exhaust emissions (CO₂ EU V)2
742 g/kWh
Husqvarna 455-20" Rancher gas Chainsaw
The 455 Rancher is the perfect chainsaw for landowners and occasional users who need a high-powered, robust, and responsive tool for various cutting conditions. It merges the superior features of its predecessor with innovative, user-friendly technology and ergonomics.
Cylinder displacement 55.5 см³
Weight (excl. cutting equipment) 13.2 lb
970 51 57-60
970 51 57-50
20" bar $549.99
Free German made Axe. Retails $89.99
Husqvarna 455 Features and Specifications.
Powerful and Efficient X-TORQ® Engine: X-Torq® engines deliver a great power and torque thanks to highly efficient combustion.
LowVib® Technology: Dampeners between the engine and chassis significantly reduce vibrations so you can work more comfortably
Decompression Valve: Reduces the cranking effort for easier starting
Quick Start with Air Purge: Air purge removes air from carburetor and fuel system for easy starting
Air Injection™ Technology: Centrifugal air cleaning system expels larger dust and debris particles before they reach the air filter to help improve engine life
Three-Piece Crankshaft: Forged three-piece crankshaft delivers maximum durability for even the toughest of jobs
Inertia-Activated Chain Brake: Reduces the likelihood of injury due to kickback.
Quick-Release Air Filter: Easily remove and replace the filter after cleaning
Fuel Indicator: Transparent fuel indicator makes it easy to check fuel level
Flip-Up Fuel Cap: Easy to open and secures firmly, even when wearing thick gloves
Snap-Lock Cylinder Cover: Saves time when changing spark plugs and cleaning.
Felling Marks: Dedicated marks for increased felling precision
No Oil at Idle: Chain oil pump disengages when engine is idling to reduce oil consumption and mess
Side-Mounted Chain Tensioner: Easier access to chain tensioning device.
Best-in-Class Starting Performance*: Variety of easy starting features for hassle-free starting *Based on the series of Husqvarna features that support the starting performance when compared to competitive chainsaw models in the 35cc to 50cc range
Combined Choke/Stop Control: Provides easier starting and reduces the risk of engine flooding
X-CUT® Chain: Exceptional sharpness and durability
20",3/8", X-cut 1,3 mm, Rancher Bar
SKU: 970 61 32‑60
Engine
Chain speed at max power 65.62 fts
Cylinder displacement 55.5 cm³
Output shaft power1
3.5 hp
Torque, max. 3.2 Nm
Torque, max. at rpm 6,600 rpm
Clutch engagement speed (±120) 3,900 rpm
Electrode gap 0.02 in
Idling speed 2,700 rpm
Ignition module air gap 0.01 in
Maximum power speed 9,000 rpm
Oil pump capacity, max 17 ml/min
Oil pump capacity, min 6 ml/min
Oil pump type Automatic
Spark Plug NGK BPMR7A, Champion RCJ7Y
Equipment
Recommended bar length, min 13 in
Pitch 3/8"
Recommended bar length, max 24 in
Chain type S83G
Bar length 50 cm
Bar length (inch) 20 in
Sprocket type Spur 7
Dimensions
Weight (excl. cutting equipment) 13.2 lbs
Sound and noise
Sound pressure level at operators ear 107 dB(A)
Sound power level, guaranteed (LWA) 115 dB(A)
Sound power level, measured 114 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 6.9 m/s²
Equivalent vibration level (ahv, eq) front handle 3.8 m/s²
Lubricant
Oil tank volume 0.7 US pint
Lubricant type (Engine) Husqvarna 2 stroke or equiv. at 50:1
Emission
893 g/kWhissions (CO₂ EU V)2
893 g/kWh
Professional Battery models of Saws.
Husqvarna T535iXP Pro. battery top handle chainsaw 12" bar
Recommended bar length, max 14 in
Weight (excl. battery and cutting equipment) 5.29 lbs
Gas performance
One battery fits all
Gear up for nonstop operation
Battery and charger not included
967 89 39-72 $489.99
Free Bli300 battery and QC500 charger, ends October 31st, 2024 or stock on hand.
Sale 15% off. Ends 11/2/24 or limited to stock on hand.
$416.49
Husqvarna T535iXP Features and Specifications.
Efficient brushless motor: Our in-house developed, advanced brushless motor is 25 % more efficient than a standard brush motor. This means that the motor provides a high and consistent torque.
Interchangeable Battery System: Able to be used in all Husqvarna battery tools, our lithium-ion batteries are durable, easy to swap and recharge quickly
Flip-up tank cap: Flip-up fuel tank caps are easy to open and secure firmly, even when wearing thick winter gloves.
Belt eyelet: Makes it quick and easy to connect the saw to the climbing harness.
Inertia-Activated Chain Brake: Reduces the likelihood of injury due to kickback.
Gas performance: The 36V Li-ion battery back provides an equally high power, reliable operation and long lifetime as gas powered products – without any direct emissions. Also, you get as much done on a single charge, as you would manage on one tank of gas.
Gear up for nonstop operation: Our battery accessories allow you to carry on and get the job done as quickly and efficiently as possible.
Rope attachment: A sturdy point for fastening a rope, making it easy to hoist the saw up into a tree.
High chain speed: High chain speed for fast, smooth cutting
Low Carbon Emissions: By choosing this product, you can feel confident that it produces lower carbon emissions during active use compared to a traditional petrol product. This battery-driven product does not emit any CO₂ during use while still providing the power and quality that you expect from a Husqvarna product. However, it’s important to note that CO₂ emissions are generated during other stages of the product´s lifecycle, such as production, charging and end-of-life disposal.
US - 12", no battery no charger
SKU: 967 89 39‑72
Engine
Chain speed at max power 65.62 fts
Battery voltage 40 V
Battery type Li-Ion
Motor type BLDC (brushless)
Oil pump capacity, max 8 ml/min
Oil pump type Automatic
Equipment
Recommended bar length, min 10 in
Pitch .325" mini
Recommended bar length, max 14 in
Chain type SP21G
Battery Not included
Bar length 30 cm
Bar length (inch) 12 in
Sprocket type Spur 7
Gauge .043"
Dimensions
Weight (excl. battery and cutting equipment) 5.29 lbs
Sound and noise
Sound pressure level at operators ear 93 dB(A)
Sound power level, guaranteed (LWA) 106 dB(A)
Sound power level, measured 104 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 2.4 m/s²
Equivalent vibration level (ahv, eq) front handle 2 m/s²
Lubricant
Oil tank volume 0.42 US pint
HusqvarnaT540iXP Professional Battery Top Handle Chainsaw
Equivalent to a 40cc gas powered saw.
Chain speed at max power 79 fts / 24 m/s
Chain Pitch .325" mini
Battery and charger not included
967863716 T540IXP 16" XP TOP HANDLE SAW $649.99
Free Bli300 battery and QC500 charger, ends October 31st, 2024, or stock on hand.
Sale 15% off. Ends 11/2/24 or limited to stock on hand.
$552.49
967863704 T540iXP 16" KIT Includes 2 BLi200X batteries, 1 QC500 charger, 1 Tool Bag for $1069.99
Husqvarna T540iXP Features and Specifications.
Husqvarna Connect: With the smart Husqvarna Connect app, you’ll have easy access to helpful tips, manuals and spare part recommendations. For your connected Bluetooth equipment, the app also provides additional information such as runtime and charging status as well as maintenance and service needs. The app can be downloaded, free of charge, from App Store or Google Play. Not yet available on all markets.
High chain speed: High chain speed for fast, smooth cutting
Unobstructed view: The hand guard design allows for an unobstructed view while doing precise cuts.
Rope attachment: A sturdy point for fastening a rope, making it easy to hoist the saw up into a tree.
Weatherproof (IPX4): This battery-powered Husqvarna machine fulfils the IPX4 classification for rain resistance. This makes it a long-lasting and reliable tool that can be used all year round in all weather conditions.
Belt eyelet: Makes it quick and easy to connect the saw to the climbing harness.
Automatic shutdown: The product is automatically shut down after 3 minutes of being idle, which prolongs the life of the battery and also lower the risk for injuries when left unattended. With the chainbrake activated, the shutdown occurs after 30 minutes.
Adjustable Oil Pump: Customize and control oil flow to meet any need
Intuitive key pad: The keypad is intuitive to operate, and you can easily adjust the settings with just the push of a button.
Gear up for nonstop operation: Our battery accessories allow you to carry on and get the job done as quickly and efficiently as possible.
Interchangeable Battery System: Able to be used in all Husqvarna battery tools, our lithium-ion batteries are durable, easy to swap and recharge quickly
Power-Conserving savE™ Mode: SavE™ mode maximises the run time, reduces noise levels and preserves product battery life by lowering the rpm. Ideal for tasks that do not require full power. Just press the button to turn savE™ mode on and off.
Retained bar nuts: The retaining function prevents loosing the bar nuts.
Efficient brushless motor: Our in-house developed, advanced brushless motor is 25 % more efficient than a standard brush motor. This means that the motor provides a high and consistent torque.
Flip-up tank cap: Flip-up fuel tank caps are easy to open and secure firmly, even when wearing thick winter gloves.
Inertia-Activated Chain Brake: In case of a kickback, the effective inertia-activated chain brake immediately stops the chain to reduce the likelihood of injury.
Low Carbon Emissions: By choosing this product, you can feel confident that it produces lower carbon emissions during active use compared to a traditional petrol product. This battery-driven product does not emit any CO₂ during use while still providing the power and quality that you expect from a Husqvarna product. However, it’s important to note that CO₂ emissions are generated during other stages of the product´s lifecycle, such as production, charging and end-of-life disposal.
Engine
Pitch .325" mini
Recommended bar length, max 16 in
Chain type SP21G
Battery Not included
Bar length 30 cm 35 cm 40 cm
Bar length (inch) 12 in 14 in 16 in
Sprocket type Spur 7
Gauge .043"
Dimensions
Weight (excl. battery and cutting equipment) 5.51 lbs Sound and noise
Sound pressure level at operators ear 92 dB(A)
Sound power level, guaranteed (LWA) 103 dB(A)
Sound power level, measured 101 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 3.4 m/s²
Equivalent vibration level (ahv, eq) front handle 2.1 m/s²
Lubricant
Oil tank volume 0.42 US pint pint
Husqvarna T542iXP Professional top handle battery chainsaw
This 40V battery-powered top-handle chainsaw is the world’s first top-handle battery chainsaw with a clutch. The T542i XP® delivers added torque and power output equivalent to 40cc gas engines. Ideal for tree care professionals and climbing arborists, this saw has an IPX4 rating for use in rain or shine. And proprietary active cooling technology delivers more consistent power and helps extend battery life. Combined with our X-PRECISION® guide bar and SP21G chain, this saw feels like gas, performs like gas, but has all the benefits of battery.
Husqvarna T542i XP® (tool only) - 970 64 68‑16 16"bar $699.99
Husqvarna T542i XP® Includes 2 batteries BLi200x 1 CQ500 charger & tool bag - 970 66 63‑19 16"bar $1,119.99
12" and 14" bar length available, call for availability.
Husqvarna T542iXP Features and Specifications.
Centrifugal clutch: The centrifugal clutch provides kick-start energy at the start of every cut, and helps keeping the chain from getting stuck in the wood.
Husqvarna Connect: With the smart Husqvarna Connect app, you’ll have easy access to helpful tips, manuals and spare part recommendations. For your connected Bluetooth equipment, the app also provides additional information such as runtime and charging status as well as maintenance and service needs. The app can be downloaded, free of charge, from App Store or Google Play. Not yet available on all markets.
High chain speed: High chain speed for fast, smooth cutting
Unobstructed view: The hand guard design allows for an unobstructed view while doing precise cuts.
Rope attachment: A sturdy point for fastening a rope, making it easy to hoist the saw up into a tree.
Weatherproof (IPX4): This battery-powered Husqvarna machine fulfils the IPX4 classification for rain resistance. This makes it a long-lasting and reliable tool that can be used all year round in all weather conditions.
Belt eyelet: Makes it quick and easy to connect the saw to the climbing harness.
Automatic shutdown: The product is automatically shut down after 3 minutes of being idle, which prolongs the life of the battery and also lower the risk for injuries when left unattended. With the chainbrake activated, the shutdown occurs after 30 minutes.
Adjustable Oil Pump: Customize and control oil flow to meet any need
Intuitive key pad: The keypad is intuitive to operate, and you can easily adjust the settings with just the push of a button.
Gear up for nonstop operation: Our battery accessories allow you to carry on and get the job done as quickly and efficiently as possible.
Interchangeable Battery System: Able to be used in all Husqvarna battery tools, our lithium-ion batteries are durable, easy to swap and recharge quickly
Power-Conserving savE™ Mode: SavE™ mode maximises the run time, reduces noise levels and preserves product battery life by lowering the rpm. Ideal for tasks that do not require full power. Just press the button to turn savE™ mode on and off.
Retained bar nuts: The retaining function prevents loosing the bar nuts.
Efficient brushless motor: Our in-house developed, advanced brushless motor is 25 % more efficient than a standard brush motor. This means that the motor provides a high and consistent torque.
Flip-up tank cap: Flip-up fuel tank caps are easy to open and secure firmly, even when wearing thick winter gloves.
Inertia-Activated Chain Brake: In case of a kickback, the effective inertia-activated chain brake immediately stops the chain to reduce the likelihood of injury.
Low Carbon Emissions: By choosing this product, you can feel confident that it produces lower carbon emissions during active use compared to a traditional petrol product. This battery-driven product does not emit any CO₂ during use while still providing the power and quality that you expect from a Husqvarna product. However, it’s important to note that CO₂ emissions are generated during other stages of the product´s lifecycle, such as production, charging and end-of-life disposal.
Engine
Chain speed at max power 79 fts
Battery voltage 40 V
Battery type Li-Ion
Motor type BLDC (brushless)
Equipment
Recommended bar length, min 12 in
Pitch .325" mini
Recommended bar length, max 16 in
Chain type SP21G
Battery Not included
Bar length 30 cm 35 cm 40 cm
Bar length (inch) 12 in 14 in 16 in
Sprocket type Rim 7
Gauge .043"
Dimensions
Weight (excl. battery and cutting equipment) 6.61 lbs
Sound and noise
Sound pressure level at operators ear 91 dB(A)
Sound power level, guaranteed (LWA) 104 dB(A)
Sound power level, measured 102 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 4.1 m/s²
Equivalent vibration level (ahv, eq) front handle 4.7 m/s²
Lubricant
Oil tank volume 0.42 US pint
Husqvarna T542iXPG Professional top handle battery chainsaw
Top-handle battery chainsaw with outstanding cutting capacity and heated handles
This 40V battery-powered top-handle chainsaw is the world’s first top-handle battery chainsaw with a clutch. The T542i XP® delivers added torque and power output equivalent to 40cc gas engines. Ideal for tree care professionals and climbing arborists, this saw has an IPX4 rating for use in rain or shine. And proprietary active cooling technology delivers more consistent power and helps extend battery life. Combined with our X-PRECISION® guide bar and SP21G chain, this saw feels like gas, performs like gas, but has all the benefits of battery. XP G model comes equipped with heated handles.
No battery / No Charger, Bluetooth
SKU: 970 64 69‑16
16"bar $749.99
12" and 14" bar length available, call for availability.
Husqvarna T542iXPG Features and Specifications.
Heated handle: Keeps your right hand warm for improved comfort and productivity. Convenient to switch on/off at the key pad.
Centrifugal clutch: The centrifugal clutch provides kick-start energy at the start of every cut, and helps keeping the chain from getting stuck in the wood.
Husqvarna Connect: With the smart Husqvarna Connect app, you’ll have easy access to helpful tips, manuals and spare part recommendations. For your connected Bluetooth equipment, the app also provides additional information such as runtime and charging status as well as maintenance and service needs. The app can be downloaded, free of charge, from App Store or Google Play. Not yet available on all markets.
High chain speed: High chain speed for fast, smooth cutting
Unobstructed view: The hand guard design allows for an unobstructed view while doing precise cuts.
Rope attachment: A sturdy point for fastening a rope, making it easy to hoist the saw up into a tree.
Weatherproof (IPX4): This battery-powered Husqvarna machine fulfils the IPX4 classification for rain resistance. This makes it a long-lasting and reliable tool that can be used all year round in all weather conditions.
Belt eyelet: Makes it quick and easy to connect the saw to the climbing harness.
Automatic shutdown: The product is automatically shut down after 3 minutes of being idle, which prolongs the life of the battery and also lower the risk for injuries when left unattended. With the chainbrake activated, the shutdown occurs after 30 minutes.
Adjustable Oil Pump: Customize and control oil flow to meet any need
Intuitive key pad: The keypad is intuitive to operate, and you can easily adjust the settings with just the push of a button.
Gear up for nonstop operation: Our battery accessories allow you to carry on and get the job done as quickly and efficiently as possible.
Interchangeable Battery System: Able to be used in all Husqvarna battery tools, our lithium-ion batteries are durable, easy to swap and recharge quickly
Power-Conserving savE™ Mode: SavE™ mode maximises the run time, reduces noise levels and preserves product battery life by lowering the rpm. Ideal for tasks that do not require full power. Just press the button to turn savE™ mode on and off.
Retained bar nuts: The retaining function prevents loosing the bar nuts.
Efficient brushless motor: Our in-house developed, advanced brushless motor is 25 % more efficient than a standard brush motor. This means that the motor provides a high and consistent torque.
Flip-up tank cap: Flip-up fuel tank caps are easy to open and secure firmly, even when wearing thick winter gloves.
Inertia-Activated Chain Brake: In case of a kickback, the effective inertia-activated chain brake immediately stops the chain to reduce the likelihood of injury.
Low Carbon Emissions: By choosing this product, you can feel confident that it produces lower carbon emissions during active use compared to a traditional petrol product. This battery-driven product does not emit any CO₂ during use while still providing the power and quality that you expect from a Husqvarna product. However, it’s important to note that CO₂ emissions are generated during other stages of the product´s lifecycle, such as production, charging and end-of-life disposal.
Engine
Chain speed at max power 79 fts
Battery voltage 40 V
Battery type Li-Ion
Motor type BLDC (brushless)
Oil pump type Adjustable flow
Equipment
Recommended bar length, min 12 in
Pitch .325" mini
Recommended bar length, max 16 in
Chain type SP21G
Battery Not included
Bar length (inch) 16 in 12 in 14 in
Sprocket type Rim 7
Gauge .043"
Dimensions
Weight (excl. battery and cutting equipment) 6.61 lbs Sound and noise
Sound pressure level at operators ear 91 dB(A)
Sound power level, guaranteed (LWA) 104 dB(A)
Sound power level, measured 102 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 4.1 m/s²
Equivalent vibration level (ahv, eq) front handle 4.7 m/s²
Lubricant
Oil tank volume 0.42 US pint
Professional Gas models of Saws.
Husqvarna T525 Professional Top handle gas Chainsaw w/ 12" bar
Our most lightweight chainsaw for tree care delivers performance when it's most needed.
Weight (excl. cutting equipment) 5.95 lbs / 2.7 kg
Cylinder displacement 1.65 cu.inch / 27 cm³
Power output 1.48 hp / 1.1 kW
967 63 33-12
$549.99
Sale 15% off. Ends 11/2/24 or limited to stock on hand.
$467.49
Free German made Axe. Retails $89.99 or 32" or 26" Loppers.
Husqvarna T525 Features and Specifications.
Belt eyelet: Makes it quick and easy to connect the saw to the climbing harness.
Simple Starting: Stop switch automatically resets to ON so tool is ready for next use
Retained bar nut: The retaining function prevents loosing the bar nut.
Side Chain Tensioning: Quickly and easily adjust the chain
Quick release air filter cover: Quick release cover saves time when cleaning or changing air filter.
Easier cold starting: Starting a cold engine requires less effort thanks to the air purge.
Flip-up tank cap: The flip-up tank cap is easy to open.
Smart Start® Technology: Specially-designed engine and starter for easy and fast starting with minimum effort
12" SN 3/8 mini" 1,3 mm S93G
SKU: 967 63 33‑12
Engine
Chain speed at max power 59.38 fts
Cylinder displacement 27 cm³
Output shaft power1
1.48 hp
Torque, max. 1.28 Nm
Torque, max. at rpm 6,000 rpm
Clutch engagement speed (±120) 4,200 rpm
Electrode gap 0.02 in
Idling speed 2,900 rpm
Ignition module air gap 0.02 in
Maximum power speed 13,500 rpm
Oil pump type Adjustable flow
Spark Plug NGK CMR6A
Equipment
Recommended bar length, min 8 in
Pitch 3/8" mini 3/8" mini
Recommended bar length, max 12 in
Chain type S93G
Bar length 30 cm
Bar length (inch) 12 in
Sprocket type Spur
Gauge .050"
Dimensions
Weight (excl. cutting equipment) 5.95 lbs
Sound and noise
Sound pressure level at operators ear 98 dB(A)
Sound power level, guaranteed (LWA) 111 dB(A)
Sound power level, measured 110 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 5.2 m/s² Equivalent vibration level (ahv, eq) front handle 4.9 m/s²
Lubricant
Oil tank volume 0.36 US pint
Lubricant type (Engine) Husqvarna 2 stroke or equiv. at 50:1
Emission
Exhaust emissions (CO₂ EU V)2
850 g/kWh
Husqvarna T540 XP Mark III professional Gas Top Handle gas chainsaw
Selecting one of the finest small chainsaws globally, the Husqvarna T540 XP® Mark II stands out. This high-end, top-handled chainsaw caters to professional clientele such as arborists, landscapers, gardeners, and utility contractors. For those requiring top-notch performance, cutting-edge features, and outstanding ergonomics, this saw is the perfect match.
Cylinder displacement 37.7 см³
Power output 2.4 hp
Weight (excl. cutting equipment) 8.6 lbs
970510016 16" bar $699.99 Usually in stock, but call to confirm.
Sale 15% off. Ends 11/2/24 or limited to stock on hand.
$594.49
Free German made Axe. Retails $89.99 or 32" or 26" Loppers.
Husqvarna T540XP Specifications
Always optimized: Thanks to AutoTune 3.0, the engine settings are always optimized for maximum startability and performance in all conditions, keeping you going no matter the challenges with no need for manual carburetor adjustments.
Connectivity ready: Keep your saw and yourself up to date with Husqvarna’s digital services. Just plug in the optional Integrated Connectivity Device under the cover. Then you’re ready to connect and diagnose the engine.
Optimized saw body: No protruding parts, a smooth underside, rounded starter cover and well-protected controls all make the saw easy to handle.
Dual attachment eyelets: A sturdy eyelet to conveniently secure the saw to the harness in combination with a separate eyelet to attach the lanyard
Air Injection filters 98% of incoming dust: The Air Injection™ feature on the chainsaw filters 98% of incoming sawdust, grit and dirt to reduce the amount of air filter cleanings and ensure high performance at all times.
X-Precision cutting equipment: The X-Precision bar and chain combination provide efficient cutting with precise control, as well as excellent bore cutting properties and reduced risk of kickback.
Felling sight to last a lifetime: Perfect sight is critical when felling – so we made one that will outlast the chainsaw itself.
Retained bar nut: The retaining function prevents loosing the bar nut.
Flip-up tank cap: The flip-up tank cap is easy to open.
LowVib® Technology: Dampeners between the engine and chassis significantly reduce vibrations so you can work more comfortably
Retained starter screws: A retaining function prevents the accidental loss of the screws holding the starter.
12" SP21G SN .325mini (US/CA)
SKU: 970 51 00‑12
14" SP21G SN .325mini (US/CA)
SKU: 970 51 00‑14
16" SP21G SN .325mini (US/CA)
SKU: 970 51 00‑16
Engine
Chain speed at max power 66.4 fts66.4 fts
Cylinder displacement 39.1 cm³ 39.1 cm³
Output shaft power1
2.6 hp
Torque, max. 1.9 Nm
Torque, max. at rpm 7,500 rpm
Clutch engagement speed (±120) 4,400 rpm
Electrode gap 0.03 in
Idling speed 3,000 rpm
Ignition module air gap 0.01 in
Maximum power speed 10,200 rpm
Oil pump type Adjustable flow, no flow at idle
Spark Plug NGK CMR7H H
Equipment
Recommended bar length, min 12 in
Pitch .325" mini
Recommended bar length, max 16 in
Chain type SP21G
Bar length 30 cm 35 cm 40 cm
Bar length (inch) 12 in 14 in 16 in
Sprocket type Spur 7
Gauge .043" "
Dimensions
Weight (excl. cutting equipment) 8.4 lbs
Sound and noise
Sound pressure level at operators ear 102 dB(A)
Sound power level, guaranteed (LWA) 112 dB(A)
Sound power level, measured 110 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 3.4 m/s²
Equivalent vibration level (ahv, eq) front handle 3.5 m/s²
Lubricant
Oil tank volume 0.49 US pint
Lubricant type (Engine) Husqvarna 2 stroke or equiv. at 50:1
Husqvarna 545 Mark II Professional - 20" gas Chainsaw
The second generation of Husqvarna’s 545 chainsaw is a 50cc unit that’s ready for felling, limbing and bucking of small and midsize trees. Designed for professional forestry and tree care crews, this durable saw has improved power and a slimmed-down design. A host of innovative features guarantee comfortable and efficient operation, season after season.
Cylinder displacement 50.1 cm³ 3.06 cu.inch
Power output 3.6 hp
AutoTune
Air Injection®
Maximum power speed 9900 rpm
Weight (excl. cutting equipment) 11.7 lbs
967 69 06-40 With 20" bar $639.99
Sale 15% off. Ends 11/2/24 or limited to stock on hand.
$543.99
Free German made Axe. Retails $89.99
Husqvarna 545 Mark 2 Features and Specifications.
Excellent cooling capacity for a longer engine life: Our new cooling system is optimised in every detail to give you a reliable chainsaw for any situation.
AutoTune: AutoTune gives optimal engine performance throughout automatic engine setting. No time spent on carburetor adjustments. It compensates for different fuels, altitude, humidity, temperature and clogged air filter.
Magnesium crankcase: Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
Smart Start® Technology: Specially-designed engine and starter for easy and fast starting with minimum effort
Snap-Lock Cylinder Cover: Saves time when changing spark plugs and cleaning.
Fuel Indicator: Transparent fuel indicator makes it easy to check fuel level
Retained bar nuts: The retaining function prevents loosing the bar nuts.
Quick-Release Air Filter: Easily remove and replace the filter after cleaning
Retained starter screws: A retaining function prevents the accidental loss of the screws holding the starter.
Flip-Up Fuel Cap: Easy to open and secures firmly, even when wearing thick gloves
LowVib® Technology: Dampeners between the engine and chassis significantly reduce vibrations so you can work more comfortably
Felling sight to last a lifetime: Having a perfect sight is critical when using a chainsaw – so we made one that’s permanently molded into the chainsaw for long-lasting felling accuracy.
Air Injection™ Technology: Centrifugal air cleaning system expels larger dust and debris particles before they reach the air filter to help improve engine life
Adjustable Oil Pump: Customize and control oil flow to meet any need
Easy to start: Combined start/stop switch and fuel pump make the saw very easy to start.
Side-Mounted Chain Tensioner: Easier access to chain tensioning device.
Slimmed-down design: Low, slender saw body makes the chainsaw easy and convenient to handle in any situation.
Powerful and Efficient X-TORQ® Engine: X-Torq® engines deliver a great power and torque thanks to highly efficient combustion.
Three-Piece Crankshaft: Forged three-piece crankshaft delivers maximum durability for even the toughest of jobs
20" SN .325" 1,3 mm SP33G
SKU: 967 69 06‑02
16" SN .325" 1,5 mm S35G
SKU: 967 69 06‑16
18" SN .325" 1,5 mm S35G
SKU: 967 69 06‑18
20" SN .325" 1,3 mm SP33G
SKU: 967 69 06‑28
16" SN .325" 1,3 mm SP33G
SKU: 967 69 06‑36
18" SN .325" 1,3 mm SP33G
SKU: 967 69 06‑38
20" SN .325" 1,3 mm SP33G
SKU: 967 69 06‑40
Chain speed at max power 62.7 fts
Cylinder displacement 50.1 cm³ ³
Output shaft power1
3.6 hp
Torque, max. 2.95 Nm
Torque, max. at rpm 7,200 rpm
Clutch engagement speed (±120) 3,900 rpm
Electrode gap 0.02 in
Idling speed 2,800 rpm
Ignition module air gap 0.01
Maximum power speed 9,900 rpm
Oil pump type Adjustable flow, no flow at idle Adjustable flow, no flow at idle
Spark Plug NGK CMR6H
Equipment
Recommended bar length, min 13 in
Pitch .325"
Recommended bar length, max 20 in
Chain type SP33G
Bar length 50 cm 40 cm 45 cm 50 cm 40 cm 45 cm 50 cm
Bar length (inch) 20 in 16 in 18 in 20 in 16 in 18 in 20 in
Sprocket type Rim 7
Gauge .050" .058"
Dimensions
Weight (excl. cutting equipment) 11.7 lbs 11.7 lbs 11.7 lbs
Sound and noise
Sound pressure level at operators ear 106 dB(A)
Sound power level, guaranteed (LWA) 116 dB(A)
Sound power level, measured 114 dB(A) 114 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 4.6 m/s²
Equivalent vibration level (ahv, eq) front handle 4 m/s²
Lubricant
Oil tank volume 0.68 US pint
Lubricant type (Engine) Husqvarna 2 stroke or equiv. at 50:1
Emission
Exhaust emissions (CO₂ EU V)2
844 g/kWh
Husqvarna 562 XP® Mark II gas professional Chainsaw
The Husqvarna 562 XP® is developed for professional loggers and skilled landowners. This all-around saw has a groundbreaking design and is loaded with innovative solutions for convenient operation, including a large-surface air filter and AutoTune™. Our unique X-Torq® engine technology provides more power where you need it, with up to 20% less fuel consumption and 60% less exhaust emissions. Plus, RevBoost™ delivers instantly high chain speeds for extra efficient de-limbing work.
Cylinder displacement 59.8 см³ 3.65 cu.inch
Power output 4.7 hp
Maximum power speed 9600 rpm
Weight (excl. cutting equipment) 13.4 lbs
970502115 24" bar $859.99
Special order
Husqvarna 562XP Mark 2 Features and Specifications.
High cutting capacity: New engine design offers plenty of grunt for peak performance even during longer cuts. The high cutting capacity makes the saw ideal for productive operation – even when using a longer guide bar.
Ability to carry longer bars: The powerful engine in combination with the large bar mount, a sturdy crankcase and sufficient chain oiling provides an ability to carry longer bars.
Slimmed-down design: Low, slender saw body makes the chainsaw easy and convenient to handle in any situation.
Always optimized: Thanks to AutoTune 3.0, the engine settings are always optimized for maximum startability and performance in all conditions, keeping you going no matter the challenges with no need for manual carburetor adjustments.
Powerful and Efficient X-TORQ® Engine: The X-Torq® engine design reduces harmful exhaust emissions by up to 60% and increases fuel efficiency by up to 20%.
Optimized saw body: No protruding parts, a smooth underside, rounded starter cover and well-protected controls all make the saw easy to handle.
Air Injection filters 98% of incoming dust: The Air Injection™ feature on the chainsaw filters 98% of incoming sawdust, grit and dirt to reduce the amount of air filter cleanings and ensure high performance at all times.
Felling sight to last a lifetime: Having a perfect sight is critical when using a chainsaw – so we made one that’s permanently molded into the chainsaw for long-lasting felling accuracy.
Magnetic filter protects the engine: A magnetic filter inside the fuel hose effectively prevents metal particles from reaching the carburetor and engine, which minimizes wear and interruptions.
Retained bar nuts: The retaining function prevents losing the bar nuts.
Low vibrations: Husqvarna’s anti vibration system efficiently separates your hands from the vibrations generated by the engine and the cutting equipment. This is to protect your body but also to reduce the fatigue in your arms and hands and in the end of the day contribute to make your workday more productive.
Quick and easy adjustment: Chain tension should be checked regularly during use. The saw comes with a side-mounted chain tensioner that makes adjustment quick and easy.
Flip-Up Fuel Cap: Easy to open and secures firmly, even when wearing thick gloves
Retained starter screws: A retaining function prevents the accidental loss of the screws holding the starter.
24" RSN C83
SKU: 970 69 67‑24
18" RSN C83
SKU: 970 69 67‑18
20" RSN C83
SKU: 970 69 67‑20
28" RSN C83
SKU: 970 69 67‑28
24" RSN Lightweight C83
SKU: 970 69 67‑54
28" RSN Lightweight C83
SKU: 970 69 67‑58
18" RSN C85
SKU: 970 69 67‑68
20" RSN C85
SKU: 970 69 67‑70
24" RSN C85
SKU: 970 69 67‑74
28" RSN C85
SKU: 970 69 67‑78
28" RSN H83
SKU: 970 69 67‑88
Engine
Chain speed at max power 70.2 fts
Cylinder displacement 59.8 cm³
Output shaft power1 4.7 hp
Torque, max. 3.44 Nm
Clutch engagement speed (±120) 4,100 rpm 4,100 rpm
Electrode gap 0.02 in
Idling speed 2,800 rpm
Ignition module air gap 0.01 in
Maximum power speed 9,600 rpm
Oil pump type Adjustable flow
Spark Plug NGK CMR6H
Equipment
Recommended bar length, min 15 in
Pitch 3/8"
Recommended bar length, max 28 in
Chain type C83 C83 C83 C83 C83 C83 C85 C85 C85 C85 H83
Bar length 60 cm 45 cm 50 cm 70 cm 60 cm 70 cm 45 cm 50 cm 60 cm 70 cm 70 cm
Bar length (inch) 24 in 18 in 20 in 28 in 24 in 28 in 18 in 20 in 24 in 28 in 28 in
Gauge .050" .050" .050" .050" .050" .050" .058" .058" .058" .058" .063"
Dimensions
Weight (excl. cutting equipment) 13 lbs
Sound and noise
Sound pressure level at operators ear 107 dB(A)
Sound power level, guaranteed (LWA) 118 dB(A)
Sound power level, measured 116 dB(A) 116 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 4.5 m/s²
Equivalent vibration level (ahv, eq) front handle 4 m/s²
Lubricant
Oil tank volume 0.7 US pint
Lubricant type (Engine) Husqvarna 2 stroke or equiv. at 50:1
Emission
Exhaust emissions (CO₂ EU V)2
778 g/kWh
Husqvarna 592 XP® professional gas chainsaw
Experience the power of our new 90cc gas-powered chainsaws! The Husqvarna 592 XP® is designed for tree care and forestry professionals
Power output 7.6 hp
Cylinder displacement 92.7 cm³
Maximum power speed 9,600 rpm
Idling speed 2,800 rpm
Torque, max. 5.87 Nm
Recommended bar length, min-max 18-36 in
Weight (excl. cutting equipment) 16.3 lbs
970493146 592 XP 36" 63GA 3/8 LWB $1,549.99
LWB = Light Weight Bar
With full wrap handle and larger dogs $1,589.98 In stock.
Sale 15% off. Ends 11/2/24 or limited to stock on hand.
$1351.49
Free German made Axe. Retails $89.99
Husqvarna 592XP Features and Specifications.
Best-in-class cutting capacity: The 592 XP® delivers best-in-class* cutting capacity. The chainsaw's dominant performance is due to the combination of an extremely powerful X-Torq® engine and the razor-sharp C85 or C83 X-Cut® chain, which makes the user better and faster while providing an improved cutting experience. (*When compared to closest competitor in the same displacement class, Stihl MS 661 C-M.)
Best-in-class power-to-weight ratio; The 592 XP® offers an unbeatable combination of low weight and high power that makes you more efficient while you work. The chainsaw's perfect balance is the result of an optimized center of gravity as well as the X-Tough™ Light bar, which together ensure easier maneuvering and better efficiency.
Easy starts and maximum reliability: The starting procedure is simplified and only one starting procedure is required no matter the conditions or temperature of the engine, which further improves the chainsaw’s reliability. Additionally, the saw is equipped with a heavy-duty air filter with rubber sealing and a robust crankcase that handles guide bars up to 36".
Always optimized: Thanks to AutoTune 3.0, the engine settings are always optimized for maximum startability and performance in all conditions, keeping you going no matter the challenges with no need for manual carburetor adjustments.
Service connector: Easier diagnostics means quicker and better service at the dealer. The service connector allows the technician to connect your saw to the digital service tool and perform all vital checks in no time.
Connectivity ready: Keep your chainsaw and yourself up to date with Husqvarna’s digital services. Optionally plug in the Integrated Connectivity Device under the cylinder cover and you’ll be ready to connect and diagnose any issues with the engine.
Optimal chip ejection avoids clogging: The clutch cover is designed to optimize rapid, safe saw chip ejection. Prevents clogging, even when cutting long-fibre wood.
Lightweight muffler: A lightweight muffler contributes to the chainsaw’s lower overall weight, which ensures comfort and efficiency without sacrificing performance.
Retained bar nuts: A handy retaining function reduces the chance of losing the guide bar nuts.
Flip-Up Fuel Cap: Easy to open and secures firmly, even when wearing thick gloves
Equipped with state-of-the-art filtration system: Chainsaw comes equipped with a heavy-duty filter for longer and better filtration via a larger filtration area compared to previous designs. Ensures a healthier engine that’s optimized for long working hours.
Air Injection filters 98% of incoming dust: The Air Injection™ feature on the chainsaw filters 98% of incoming sawdust, grit and dirt to reduce the amount of air filter cleanings and ensure high performance at all times.
Retained starter screws: A retaining function prevents the accidental loss of the screws holding the starter.
Fast acceleration: Engine parts are designed to be low weight and optimized for faster acceleration.
Felling sight to last a lifetime: Having a perfect sight is critical when using a chainsaw – so we made one that’s permanently molded into the chainsaw for long-lasting felling accuracy.
Visible fuel level: The large transparent tank window makes it quick and easy to check the fuel level at a glance without opening the fuel tank’s lid.
Powerful and Efficient X-TORQ® Engine: X-Torq® engines deliver a great power and torque thanks to highly efficient combustion.
32" X-Tough RSN - 3/8" - 1,5mm - X-Cut C85
SKU: 970 49 31‑32
20" X-Tough RSN - 3/8" - 1,5mm - X-Cut C85
SKU: 970 49 31‑40
32" X-Tough Light RSN - 3/8" - 1,6mm - H83
SKU: 970 49 31‑42
24" X-Tough RSN - 3/8" - 1,5mm - X-Cut C85
SKU: 970 49 31‑44
36" X-Tough Light RSN - 3/8" - 1,6mm - H83
SKU: 970 49 31‑46
28" X-Tough RSN - 3/8" - 1,5mm - X-Cut C85
SKU: 970 49 31‑48
20" X-Tough RSN - 3/8" - 1,3mm - X-Cut C83
SKU: 970 49 31‑50
32" X-Tough RSN - 3/8" - 1,3mm - X-Cut C83
SKU: 970 49 31‑52
24" X-Tough RSN - 3/8" - 1,3mm - X-Cut C83
SKU: 970 49 31‑54
36" X-Tough RSN - 3/8" - 1,6mm - H83
SKU: 970 49 31‑56
28" X-Tough Light RSN - 3/8" - 1,3mm - C83
SKU: 970 49 31‑58
32" X-Tough RSN - 3/8" - 1,6mm - H83
SKU: 970 49 31‑62
28" X-Tough RSN - 3/8" - 1,3mm - C83
SKU: 970 49 31‑68
28" X-Tough RSN - 3/8" - 1,6mm - H83
SKU: 970 49 31‑78
Engine
Cylinder displacement 92.7 cm³
Output shaft power1 7.6 hp
Torque, max. 5.87 Nm
Torque, max. at rpm 7,800 rpm
Clutch engagement speed (±120) 4,300 rpm
Electrode gap 0.02 in
Idling speed 2,800 rpm
Ignition module air gap 0.01 in
Maximum power speed 9,600 rpm
Oil pump type Adjustable flow, no flow at idle
Spark Plug NGK CMR6H
Equipment
Pitch 3/8"
Recommended bar length, max 36 in
Sprocket type Rim 7
Dimensions
Weight (excl. cutting equipment) 16.3 lbs
Sound and noise
Sound pressure level at operators ear 112 dB(A)
Sound power level, guaranteed (LWA) 119 dB(A)
Sound power level, measured 118 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle 5.9 m/s²
Equivalent vibration level (ahv, eq) front handle 6.7 m/s²
Lubricant
Oil tank volume 0.89 US pint
Lubricant type (Engine) Husqvarna 2 stroke or equiv. at 50:1
Emission
Exhaust emissions (CO₂ EU V)2
736 g/kWh
No-Spill Gas Cans
Push Button Control
View Stripes Front & Back
Flow Stops Automatically
Fastest Flow Rate
Large Neck Opening
Wide, Stable Design
Professional Quality
3 Year Limited Warranty
Our store location, contacts and hours.